1. Ensure Stable Placement

• Place the stand on a flat, non-slip surface (avoid uneven floors, carpets with loose fibers, or wet areas).
• Fully spread the stand’s legs to form a stable triangular base—do not keep legs partially closed.
• For tall setups (over 2m) or heavy lights, add a weighted base (e.g., sandbag) around the leg joints to lower the center of gravity.

2. Avoid Overloading & Improper Mounting

• Check the stand’s maximum load capacity (marked on the product) and never exceed it—overloading causes tipping.
• Mount the light as low as possible on the stand’s pole; avoid attaching heavy fixtures near the top (increases instability).
• Secure the light tightly with locking knobs—ensure no loose connections that could cause the light to fall.

3. Electrical Safety (For Powered Lights)

• Keep power cords away from the stand’s moving parts (e.g., telescopic poles) to prevent fraying or pinching.
• Avoid routing cords across walkways—use cable covers to prevent tripping and protect cords from damage.
• Ensure the light and stand are dry before use; never use them near water (e.g., bathrooms, rain) to avoid electric shock.

4. Safe Adjustment & Storage

• When adjusting height or angle, hold the light fixture with one hand to prevent it from swinging or falling.
• Do not lean on the stand or hang additional objects (e.g., bags) on it—this disrupts balance.
• Fold the stand properly after use; avoid dropping or hitting it to prevent structural damage (e.g., bent legs, broken locks).

5. Environmental & Usage Limits

• Do not use light stands in strong winds (outdoor use) unless they are anchored or weighted—wind can tip unstable stands.
• Keep stands away from high-temperature sources (e.g., heaters, stoves) to prevent material deformation or fire risks.
• Ensure there is enough clearance around the stand—avoid blocking emergency exits or walkways.